青草视频在线播放,女人做爰高潮全黄,国产精品亚洲日韩欧美色窝窝色欲

4******5 評價于 2019/4/12 21:47:53

可不可以，不要用天天快遞啊，下午就看到已經到我們這個地方，第二天才給送過來。

x****g 評價于 2018/10/30 15:21:17

價格優惠了，而且材料跟以前的一樣

z***n 評價于 2018/8/1 11:28:22

在我們合肥這塊材料都沒你們價格有優勢，長期合作。

w*********9 評價于 2018/4/21 15:26:41

挺好的，這種方式可以減輕我們的備貨壓力。

w*******k 評價于 2018/1/13 23:53:00

服務很到位

o***k 評價于 2017/8/29 13:19:54

預計這個材料下個月我們采購量會很大，提前給你們說一聲。

g*****a 評價于 2017/6/7 17:45:21

貨收到后，檢查來了貨還是沒問題，就是外包裝有點問題了，下次要注意啊。

k*******1 評價于 2017/3/2 23:26:55

品質還是不錯的，價格也挺給力。

Typical Properties of Hi-Flow 650P
Property	Imperial Value	Metric Value	Test Method
Color	Gold	Gold	Visual
Reinforcement Carrier	Polyimide	Polyimide	***
Thickness (inch) / (mm)	0.0045 - 0.0055	0.114 - 0.140	ASTM D374
Film Thickness (inch) / (mm)	0.001 - 0.002	0.025 - 0.050	ASTM D374
Inherent Surface Tack (1 or 2-Side)	1	1	***
Elongation (%45o to Warp and Fill)	40	40	ASTM 882A
Tensile Strength (psi) / (MPa)	7,000	7,000	ASTM 882A
Continuous Use Temp (°F) / (°C)	-40 to 302	-40 to 150	***
Phase Change SofteningTemp (°F) / (°C)	126	52	ASTM D3418
Electrical
Dielectric Breakdown Voltage (Vac)	5000	5000	ASTM D149
Dielectric Constant (1000 Hz)	4.5	4.5	ASTM D150
Volume Resistivity (Ohm-meter)	10¹²	10¹²	ASTM D257
Flame Rating	V-O	V-O	U.L. 94
Thermal
Thermal Conductivity (W/m-K) (1)	1.5	1.5	ASTM D5470
Thermal Performance vs Pressure

Pressure (psi)	10	25	50	100	200
TO-220 Thermal Performance (oC/W) 0.0010"	1.20	1.15	1.11	1.06	1.00
TO-220 Thermal Performance (oC/W) 0.0015"	1.47	1.41	1.37	1.33	1.29
TO-220 Thermal Performance (oC/W) 0.0020"	1.59	1.48	1.43	1.38	1.35
Thermal Impedance (oC-in²/W) (2) 0.0010"	0.21	0.20	0.19	0.18	0.17
Thermal Impedance (oC-in²/W) (2) 0.0015"	0.23	0.22	0.21	0.20	0.20
Thermal Impedance (oC-in²/W) (2) 0.0020"	0.27	0.27	0.26	0.25	0.24
1) This is the measured thermal conductivity of the Hi-Flow wax coating. It represents one conducting layer in a three-layer laminate. The Hi-Flow coatings are phase change compounds. These layers will respond to heat and pressure induced stresses. The overall conductivity of the material in post-phase change, thin film products is highly dependent upon the heat and pressure applied. This characteristic is not accounted for in ASTM D5470. Please contact Henkel Product Management if additional specifications are required. 2) The ASTM D5470 test fixture was used and the test sample was conditioned at 70°C for 5 minutes prior to test. The recorded value includes interfacial thermal resistance. These values are provided for reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied.

迅雷官网,美妙人妻系列100部,大屁股videoshd,极品粉嫩一线虎白