貝格斯 Hi-Flow 300G
特點和好處
熱阻抗：0.20°c-in2 / W（@ 25 psi）
抵抗跑步或滴水
一種玻璃纖維載體上的相變復合材料
高流量300g由導熱55°C相變復合涂覆在玻璃纖維網。高流量300g設計為計算機處理器和散熱器之間的熱界面材料。
在相變溫度、高流量300g打濕的熱面和流動產生較低的熱阻抗，材料要求的裝配壓力引起的流動。高流量300g將抵制滴流
應用方法：
1。一方面適用于40°- 50°C散熱。散熱片加熱爐或熱槍40°- 50°C允許的高流量300g墊應像膠墊之間。熱沉冷卻到室溫和包裝。
2。適用于20°- 35°C熱沉。高流量300g可應用于室溫的熱沉與泡沫輥的援助。該盤位于散熱器和手機是用來申請30 psi的壓力。
3。自動化設備30 psi的壓力。選擇和自動分配單元可以用于高流量300g至室溫的熱沉，鋪放頭應該有一個柔軟的硅橡膠墊，并用30磅的壓力墊轉移到20-35°C熱沉。
典型的應用包括：計算機及外圍設備.作為熱界面，裸模露需要熱沉
性能：
配置可用
板材形式，模切件和軋輥形式
|
Property
|
Imperial Value
|
Metric Value
|
Test Method
|
|
Color
|
Green
|
Green
|
Visual
|
|
Reinforcement Carrier
|
Fiberglass
|
Fiberglass
|
***
|
|
Thickness (inch) / (mm)
|
0.005
|
0.127
|
ASTM D374
|
|
Elongation (%45o to Warp and Fill)
|
40
|
40
|
ASTM 882A
|
|
Tensile Strength (psi) / (MPa)
|
400
|
3
|
ASTM 882A
|
|
Continuous Use Temp (°F) / (°C)
|
212
|
100
|
***
|
|
Phase Change Temp (°F) / (°C)
|
131
|
55
|
ASTM D3418
|
|
Electrical
|
|
Dielectric Breakdown Voltage (Vac)
|
300
|
300
|
ASTM D149
|
|
Dielectric Constant (1000 Hz)
|
3.5
|
3.5
|
ASTM D150
|
|
Volume Resistivity (Ohm-meter)
|
108
|
108
|
ASTM D257
|
|
Flame Rating
|
V-O
|
V-O
|
U.L. 94
|
|
Thermal
|
|
Thermal Conductivity (W/m-K) (1)
|
1.6
|
1.6
|
ASTM D5470
|
|
Thermal Performance vs Pressure
|
|
Pressure (psi)
|
10
|
25
|
50
|
100
|
200
|
|
TO-220 Thermal Performance (oC/W)
|
0.96
|
0.92
|
0.88
|
0.85
|
0.84
|
|
Thermal Impedance (oC-in2/W) (2)
|
0.27
|
0.20
|
0.16
|
0.15
|
0.14
|
1) This is the measured thermal conductivity of the Hi-Flow coating. It represents one conducting layer in a three-layer laminate. The Hi-Flow coatings are phase change compounds. These layers will respond to heat and pressure induced stresses. The overall conductivity of the material in post-phase change, thin film products is highly dependent upon the heat and pressure applied. This characteristic is not accounted for in ASTM D5470. Please contact Henkel Product Management if additional specifications are required.
2) The ASTM D5470 test fixture was used and the test sample was conditioned at 70°C prior to test. The recorded value includes interfacial thermal resistance. These values are provided for reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied.
|