詳細說明：

3M Fastbond和Scotch-Grip接觸型接著劑

40年傳統，歷久彌新

**系列的接觸型接著劑，可依據不同的要求選擇各式的黏著強度、可操作時間、所含固態組成、溶劑型或非溶劑型。

老字號的水膠-3M Fastbond 30NF接觸型接著劑-在櫥櫃業界中已使用超過了40年，及至今日仍廣泛的被應用，並符合現金的空氣品質規範。此外，**新產品3M Fastbond 200NF接觸接著劑的初期強度遠超過大部分的溶劑型膠，剪應力高達350psi。

3M 30-NF的高粘度型，適合于滾涂。固含量50%，綠色的中等粘度液體。

可使用噴槍、滾涂、滾筒、刷涂。施膠。粘接時間達4小時。

3M 30H不推薦用于干墻或金屬表面。

Non-flammable in the wet state.

Post-formable and heat resistant.

Bonds most foamed plastics, plastic laminate, wood, plywood, and canvas to

themselves and to each other.

3M Fastbond Contact Adhesive 30 has been tested and approved for use by

the Woodwork Institute of California under the provisions of ANSI/HPMA HP

1983 for Type II adhesive and the heat resistance test set forth in its Manual of

Millwork.

Fastbond contact adhesive 30 is recognized under the Component Program

Underwriter’s Laboratories, Inc. Component Recognition Program Guide GSRJ2,

File R14485, Door Construction Materials. For use with swinging type fire doors

of the hollow metal and steel composite types rated up to and including 3 hours.

PPAP (Production Part Approval Process) documentation has been issued for

3M Fastbond Contact Adhesive 30H.

Not recommended for drywall laminating or for bonding metal surfaces (unless

metal surfaces are completely dried by force drying and protected from moisture).