詳細說明：

GX-T4 PVC、PE涂膠機 （PVC&PE coating machine）

適用范圍：PVC、PE涂膠機用于PE、PVC等材料的油性涂膠。

Application: suitable for coating PE, PVC(Oil-based glue) 
技術參數：
產品幅寬： 1300mm(1600mm)
機械速度： 50M/min
**大放料直徑 800mm
上膠均勻度：±1.5μ
收卷整齊度:±3mm
整機功率: 20-100HP
整機尺寸：45×2.8×5.8M

Technical parameters:
effective Width: 1300mm
speed: 50M/min
Maximum unwinding diameter：800mm
coating uniformity: ± 1.5μ
rewinding uniformity: ± 3mm
Total power: 20-100HP
Machine size: 45 × 2.8 × 5.8M
特點：
1.低膠上膠機：以橡膠滾筒及壓花滾筒之間的間隙，將底膠定量涂在膜上。

2．吸布臺：可手動調整皮帶松緊，皮帶附導溝，防止偏離

3．機架帆布組，帆布采用EPC對邊及汽動式帆布張緊裝置

4．面膠上膠機：逗點刮刀方式

5．全自動低張力蓄布機及表面卷取機，蓄布機及全自動卷取機為**組**立設備，由PLC控制，操作方便

Features:
1.The prime glue coater:the fixed quantity to the film in accordance with the gap between rubber roller and embossing roller

2.Tension of the belt could be manually adjusted through the coating suction table
3. The frame canvas sets are designed with EPC alignment mechanism and pneumatic canvas tensioner.
4. The surface glue coater: comma scrape mode

5. Fully-automatic low-tension stacking machine and surface rewinder.They are all respectively one set of independent equipment each and controlled by PLC controller, operation simple and easy.

詳情可登陸我們的網站：http：//www.yonle.com.cn 。如有需要請同本公司聯系，歡迎來電來郵咨詢。Email：yl@yonle.com.cn   電話：0769-83526018、83526020    聯系人：余小姐、楊小姐   手機：13922973751范先生