詳細說明：

    該機可組成雙、三、四、五色印刷開槽機，能同時完成印刷、分切、壓痕、開槽、切角工序。
    ● 印刷部功能：
    ◆ 印刷部傳動部分采用大螺旋角斜齒傳動，在降低噪音的情況下，提高了齒輪的強度和傳動的平穩性。而且傳動齒輪采用45#鍛造件，且調質淬火處理，增強了耐用性和壽命，使套色精度有了很長時間的保證。
    ◆ 印刷部傳動部分，進紙采用十字滑塊傳動。壓印輥及接紙輥齒輪采用衛星式搖板傳動機構，即在壓印和接紙間隙大小調整的過程中齒輪之間始終正常嚙合，不增大齒頂和齒側間隙，使套印尤其多色套印更加準確，并使齒輪間應損降至**低。
    ◆ 向位部分采用360度停機和不停機調整?？稍诠ぷ鬟^程和停機狀態下調整，并有刻度顯示，但與現行向位調整不同的是：在大齒輪傳動接合部采用2個軸承支撐接合，避免了現行齒輪與調整內齒圈套式結合所產生的端面跳動和易鎖死現象和使用壽命低等缺陷。而且調整部分采用行星加蝸輪蝸桿傳動方式，增大了傳動力矩和調整的方便準確性。
    ● 著墨部功能：
    ◆ 著墨部分勻墨采用膠輥，網輥著墨，而且根據用戶印刷情況的多樣性對線速比進行了優化，加粗了網輥和膠輥的輥徑，使轉速比更加合理和增加了運轉中勻墨的平穩性和軸的剛性。傳動亦做了改進，由原來的間接網輥傳動改為直接傳動。在膠輥間隙任意調整的情況下，網輥齒輪之間無間隙，使網輥與版輥線速始終保持**致，使積累和著墨重影以及清晰度有了很大的改觀。
    ● 開槽部功能：
    ◆ 開槽部采用先開槽后壓線，方便調整，且開槽刀盤移動齒輪為內裝式，使操作更方便。

Brief Introduction:
    Brief introduction to the performance:
This machine can constitute the double-color, 3-color,4-color and 5-color printing & slotting machines which can simultaneously accomplish the process of printing, separate cutting, creasing, slotting and corner cutting.
    ● Function of the printing part:
    ◆ The drive part of the printing part adopts the big screw and bevel gear drive which increases the strength of the gears and the driving stability under the circumstance of lowering the noise. With 45# forging-works and quench treatment the drive gears have increased the durability and life, and greatly guaranteed the precision of chromatographing.
    ◆ The paper-feeding of the drive part of the printing part adopts cross sliding drive. The gears of the print pressing roller and the paper-catching roller adopt the planetary rocker-plate drive device. The gears are normally meshed from beginning to end while the space between the print pressing and the paper catching is adjusted, which does not enlarge the space between the gear-top and gear-side, make the color process (esp. the multi-color process) more accurate and lower the wear between the gears to the minimum.
    ◆ The phase part adopts 360?adjusting while stop working or during working. The scale will display this two kinds of adjustment which are different from the current phase adjusting, i. e. the driving and jointing part of the large gear adopts 2 bearings to support and joint, which has prevented the sleeve joint of the current gear and the inside-gear-circle from the ends-and-surface moving up and down, easy to lock, short service life and other defects. And the adjusting part adopts the planetary, worm wheel and worm driving method, which has greatly enlarged the drive moment and raised the accuracy of adjusting.
    ● Function of inking part:
    ◆ The ink distributing of the inking part adopts the rubber roller and the anilox roller inking. The linear velocity has been improved according to the variety of the printing situations of the clients. The thickness of the roller diameter of the anilox roller and the rubber roller has been increased which has made the rotating speed rate more reasonable, and added the stability of ink distributing during operation and the rigidity of the axle. The drive has also been improved, i.e. changed to direct drive from the original indirect anilox roller drive. Under the circumstance of the space between the anilox rollers can be free adjusted, there is no space between the gears of the anilox rollers, which makes the linear velocity of the anilox roller and the plate roller keeping consistent from beginning to end, and makes the repeated trace of ink accumulating, inking and the clarity greatly improved.
    ● Function of slotting part:
    ◆ The slotting part adopts the method of the first slotting and then creasing which is convenient to adjust. The moving gear of the knife disk of slotting is inside-installed-type which is convenient to operate.